Introduction

The Cisco SFP-10G-BXD-I and SFP-10G-BXU-I SFPs operate on a single strand of standard SMF.

A SFP-10G-BXD-I device is always connected to a SFP-10G-BXU-I device with a single strand of standard SMF with an operating transmission range up to 10 km.

The communication over a single strand of fiber is achieved by separating the transmission wavelength of the two devices. SFP-10G-BXD-I transmits a 1330-nm channel and receives a 1270-nm signal, whereas SFP-10G-BXU-I transmits at a 1270-nm wavelength and receives a 1330-nm signal. The presence of a wavelength-division multiplexing (WDM) splitter integrated into the SFP to split the 1270-nm and 1330-nm light paths.

Performance

SFP transceiver type

Fiber optic

Maximum data transfer rate

10000 Mbit/s

Interface type

SFP+

Single-mode fiber (SMF) supported

Y

Fiber optic connector

LC

Fiber cable diameters supported (core/cladding)

9/125 µm

SFP transceiver standard

BX

Maximum transfer distance

10000 m

Wavelength

1270 nm

Networking standards

IEEE 802.3,IEEE 802.3ab,IEEE 802.3ae,IEEE 802.3u

Cabling technology

10GBASE-BXU

Auto MDI/MDI-X

Y

Features

Hot-Plug support

Y

Certification

MSA

Operational conditions

Operating temperature (T-T)

-40 - 85 °C

Storage temperature (T-T)

-40 - 85 °C

Operating relative humidity (H-H)

0 - 95%

Storage relative humidity (H-H)

0 - 95%

Weight & dimensions

Width

13.4 mm

Depth

56.5 mm

Height

8.5 mm

Packaging data

Number of products included

1 pc(s)